Digital Junction Box-DJ04-2 Load Cell Accessories With Modbus

Good quality DJ04-2 Digital Load Cell Junction Box 100% FS Zeroing Range With Modbus 24bits

Digital junction box with RS485 output +modbus

• The digital junction box is based on resistance strain sensor as signal source,
• It is composed of 24bits Σ-Δ type A/D conversion technology and The 8 bit single chip microcomputer etc.large-scale integrated circuit.
• It is with high accuracy, high reliability.

Main functions:

¨ panel keyboard settings, capacity calibration

¨ Has function to display weight setting.

¨ Can point out failures, operational error.

¨ RS485 output,Can set the corresponding weight value of 4mA and 20mA.

Main Technical Parameters

1. A/D sampling rate: 7.5 Times/s~240Times/s optional
2. Internal resolution: 24bits
3. Non-linearity: ≤0.005%F.S
4. Zero drift: ≤0.2μV/℃
5. Temperature coefficient of capacity: ≤10ppm/℃
6. Net input signal range of full capacity: 2~20mV
7. Initial weight signal range: -1~+9mV
8. Analog input signal sensitivity:0.5uV /d(Minimum) 1.5uV/d(Recommended)
9. Zeroing range: 100%FS
10. Display: 6 red LED digital tubes(height of word is 14mm
11. Amibent temperature of operation: -5℃~ 45℃
12. Relative humidity: ≯ 90%(Non condensing)
13. Power supply: +18 ~ +26 VDC,0.5A
14. Sensor bridge excitation: DC 5V,can connect 6 load cells of 350 ohms or 12 load cells of 7

INNOVATION ELECTRONIC CO..,LTD Focus on Weighing and Static solution in Packing industry!

In the past tens of years, we established very good relationship with wide range of suppliers and customers in weighing and static products especially in packing industry and also investigated in our own factories of weighing and static, step by step, we get our own special advantages in this market: more accuracy and more economic weighing and static solution for you!

Our weighing solution mainly include:

1. all kinds of load cells( tension and compression load cell, s type load cell, single point load cell, shear beam load cell, those load cells are widely used in kinds of packing industry like food weighing and packing, cement weighing and packing, chemical dosing and packing, pharmaceutical dosing and packing, electronic balance, silo scale, truck scale, etc. )

2. High accuracy bench scale, floor scale, table scale, counting scale. They are widely used in kinds of places that need high accuracy weighing, like small bolts counting and packing, expensive powder and particles weighing and packing, sub-package system,etc.

3. Weighing equipment like dosing machine, checkweigher, roller conveyor scale, etc. This equipment are widely used in weighing and packing production line. The main use is to feed material of set quantity, and double check whether the weight is in the allowed range or not and eliminate the packages that not in allowed range.

The Static solution mainly include:

1. Static charging machine of 20KV, 30KV, 60KV, 100KV. They are wide used in packing material production line, like plastic film machine, bag making machine, IML labeling machine,side weld bag handles, shrink wrapping, electrostatic bonding, etc.

2. Static eliminators of 7.5KV, 6kv, AND anti-static bar,Ionizing air gun, Ionizing Air nozzle, Static foam, etc. These eliminators are widely used in static elimination before packing of finished products. It is to make the packing better, or to remove the dust on the surface of products.

If you have any weighing or static problem especially in packing industry, contact us, we are confident to provide you a suitable and economic Solution!